Adjusting Picture Sharpness; Selecting The Audio Output Mode - Samsung SV-7000W Owner's Instructions Manual

00407A)SV-7000W-GB-3_sea
GB
REC.SPEED CLK/COUNT
2
3
5 6
SYSTEM
OK
2
AUTO
STROBE
2
3
ART
5 6
9
8
L
L R
32
7/24/01 11:18 AM

Adjusting Picture Sharpness

The Picture Sharpness feature enables you to adjust the sharpness
of the image according to your own preferences.
PICTURE TIMER
1
STROBE AUDIO
ART INPUT
SYSTEM
2
MENU

Selecting the Audio Output Mode

You can select the mode in which the sound is reproduced on the
LINE and AV outputs. The following options are available.
AUDIO
INPUT
CH
R MIX
MONO
To select the sound mode, simply press the AUDIO button on the remote
control until the required option is displayed.
Page 32
1
During playback, press the PICTURE button.
Result: The picture bar appears.
2
Press the and buttons until the picture is adjusted to your
liking.
If you do not press a button within six seconds, the picture
bar automatically disappears.
3
On completion, press the PICTURE button again.
Option
L Used to listen to the sound on the left Hi-Fi channel.
R Used to listen to the sound on the right Hi-Fi channel.
MIX Used to listen to the mixed sound of the Hi-Fi and linear
audio. (For example, you can play back Hi-Fi audio sound
while at the same time listening to narration dubbed onto
the normal audio track. See pages 43 and 44 for further
details of the Audio Dubbing feature.)
MONO Used to listen to the sound on the linear mono channel.
L R Used to listen to Hi-Fi stereo sound on the left and right
channels.
When playing back tapes recorded in Hi-Fi, the
sound switches to Hi-Fi after five seconds of Mono.
Description