Upgrading Memory - Samsung N-Series User Manual

Upgrading Memory

A memory is installed in the memory slot at the bottom of this
computer. The procedures to replace the memory are described
below.
• Replace new memory only after shutting the computer
down completely. Do not replace memory when the
computer is in Sleep mode. Disconnect main power plug
and remove the battery before continuing.
• The images used for the illustration are of a representative
model, therefore the images may diff er from the the actual
product.
• You must use only memory modules with the specifi cations
(DDR2 or DDR3) printed on the memory slot that appears
when you open the memory compartment cover at the
bottom.
e.g) in the case of using DDR2
Replacing the Memory
1
Remove the screw on the memory compartment cover at the
bottom of the computer using a screw driver.
2
Pull the memory module latches outward. The memory
module will pop up.
Remove the memory module out at an angle of 30 degrees.
Chapter 3
80
Settings and Upgrade
Fixing Screw