Switching The Angle; Displaying The Angle Mark; Settings During Playback; Disc Menu Control - Sharp Aquos LC-46LB700X Operation Manual

Disc Playback

Switching the Angle

If multiple angles are recorded, you can switch
between them.
Press ANGLE during playback.
• The display indicates the angle number currently being
played back. Each time you press ANGLE, the angle
switches.
• "–" is displayed if a disc is recorded with only one angle.
To return to the previous angle, press ANGLE to cycle
through the angles until you return to the original angle.

Displaying the Angle Mark

You can change settings so that Angle Mark appears
in the right bottom part of the screen when multiple
angles are recorded. (The Angle Mark is only displayed
for DVD-VIDEO.) The settings can be changed in "Blu-
ray disc Setup" - "Playback Setting" - "Angle Mark
Display". (See page 65.)
NOTE
• Settings for audio, subtitles and angle can be changed also
in DISC MENU control screen. (See this page.)
• The operations of subtitles, angle and audio differ
according to each disc. You may need to refer to the
operation manual of the disc.
• The following operations will not work when playing back
an audio CD:
Slow Playback, Frame Advance
Display of functions
• The display for subtitles, angle or audio automatically
disappears after 5 seconds.
Switching between functions
• You can switch the subtitles, angle and audio at the DISC
MENU control screen. (See this page.)
• The operation for each function varies depending on the
disc. See the manual for the disc.
Fast Forward/Reverse
• You cannot perform Fast Forward/Fast Reverse between
titles. At the end or beginning of the title, Fast Forward/
Fast Reverse will be cancelled and normal playback will
automatically resume.
• Subtitles are not played back with BD/DVD-VIDEO discs
during Fast Forward and Fast Reverse.
Slow Playback
• You cannot perform Slow Playback between titles. At the
end of the title, Slow Playback will be cancelled and normal
playback will automatically resume.
Repeat Playback
• Repeat Playback may be forbidden depending on the disc.
• Partial Repeat Playback may not work in multi-angle scenes.
• For Partial Repeat Playback, set the start and end points
within the same title.
1

Settings During Playback

DISC MENU Control

This allows you to adjust various settings at once, like
subtitles, angle settings and the title selection for Direct
Playback. You can adjust the video and audio to suit
your preferences. The operations are the same for BD
and DVD.
DISC MENU control screen
1 BD-VIDEO
1 / 3
5 / 25
00 : 20 : 30
2 English
1
2
1 5 . 1c h
Off
Select Enter
ENTER
3
Return
RETURN
1 Playback status display
Shows the operation status and the disc type.
2 Setting items
Selects a title or chapter for playback, or performs
video/audio settings.
• Title Number (Direct Title Skip)
• Chapter Number (Direct Chapter Skip)
• Playback Elapsed Time (Direct Time Skip)
• Subtitle Language
• Angle Number
• Audio
• Repeat
3 Operation guide display
Provides help on remote control button operations.
63