Page 1
ZvPro820 | ZvPro810 | ZvPro620 | ZvPro610 Welcome to ZeeVee! All ZeeVee products convert your video source to a digital TV channel and broadcast it over coax to all your HDTVs. This guide walks you through basic setup for the ZvPro Series modulators. If you run into any problems during installation, refer to the Support page on www.zeevee.com or feel free...
Displays configuration and system status. Digital Audio/Video: Unencrypted HDMI Audio/Video Inputs Teletext: Composite ZvPro820 | ZvPro810 Analog Audio: 3.5mm Audio Up to 2 paired, frequency-agile DVB-T/C RF Coax Output CATV output channels for up to 2 video sources. ...
Basic Installation Unencrypted Composite Analog HDMI Out Video Audio Unencrypted HDMI Video Source RF Output +25 dBmV Coax cable connects to coax network Optional Delay Matched Analog Audio out to audio system Factory default settings in the product allow ZvPro Series modulators to broadcast up to two unencrypted HDMI sources on RF channels 21 and 22 for reception at connected HDTVs.
Configuration Front Panel Configuration ZeeVee modulators typically only require setting the RF channels. This can be done using the Front Panel controls. 1. Unlock the panel by pressing / holding together the arrow buttons until “Setup” lights up. Press “OK” to enter the Configuration screen.
German, Italian, Spanish, and Russian visit our website: http://www.zeevee.com/support/configuration Pour obtenir des instructions à Français visitez notre site Web . Eine Anleitung in deutscher Sprache finden Sie auf unserer Website. Per le istruzioni in italiano visitate il nostro sito .
To Get Warranty Service Warranty service will be provided by ZeeVee through our Distribution partner(s) in the country of purchase. If you believe you need service for your ZvPro Series Modulator (MODEL NUMBERS ZVP820-EU, ZVP810-EU, ZVP620-EU, ZVP610-EU), please contact your local distributor where you purchased the product.