Table of Contents
Advertisement
LOCATION AND MOUNTING
1. Hoffman electric heaters should be centered as low as possible in the enclosure for
optimum heat distribution.
2. It is recommended that the heater be installed on a non-combustible metal panel for
optimum performance. It may, however, be mounted on any metal surface.
WARNING: Heaters must not be installed on wood or other combustible surfaces.
3. The heater should be mounted in a vertical position with the terminal block at the
bottom and the air outlet openings at the top as shown.
4. The recommended clearances shown by the shadowed area indicates the space that
should be kept free of components for safe operation of the heater.
WARNING: Heat sensitive components must not be placed above the heater discharge
area.
5. Four 10−32 UNF, self−tapping screws are included for installation.
Vertical Surface Mounting
DAH1001A, DAH1002A
DAH2001A, DAH2002A
DAH4001B, DAH4002B
DAH8001B, DAH8002B
DAH13001C, DAH13002C
87565511
© 2012 Pentair Technical Products
English
Optional Horizontal Surface Mounting
Watts
X
100
4
200
6
400
6
800
8
1300
8
PH 763 422 2211 • hoffmanonline.com
D
5.00 (127 mm)
7.00 (178 mm)
E
3.25 (83 mm)
3.50 (89 mm)
- 3 -
Advertisement
Table of Contents
