Controlling The Camera Remotely; Configuring Settings For Camera - Samsung GT-19205 User Manual

Media

Controlling the camera remotely

Set the device as a viewfinder to control the camera remotely.
→ → Remote viewfinder, and then connect the device and the camera using
Tap
Wi-Fi Direct or NFC. Tap

Configuring settings for Camera

→
Tap to configure settings for Camera. Not all of the following options are available
in both still camera and video camera modes. The available options vary depending on the
mode used.
• P hoto size / Video size: Select a resolution. Use higher resolution for higher quality. But it
takes up more memory.
• F ace detection: Set the device to recognise people's faces and help you take photos of
: Set the device to recognise people's faces and help you take photos of : Set the device to recognise people's faces and help you take photos of
them.
• M etering: Select a metering method. This determines how light values are calculated.
: Select a metering method. This determines how light values are calculated. : Select a metering method. This determines how light values are calculated.
Centre-weighted measures background light in the centre of the scene. Spot measures
the light value at a specific location. Matrix averages the entire scene.
• I SO: Select an ISO value. This controls camera light sensitivity. It is measured in film-
: Select an ISO value. This controls camera light sensitivity. It is measured in film- : Select an ISO value. This controls camera light sensitivity. It is measured in film-
camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are
for fast-moving or poorly-lit objects. for fast-moving or poorly-lit objects. for fast-moving or poorly-lit objects.
• A nti shake: Activate or deactivate anti-shake. Anti-shake helps focus when the camera is
: Activate or deactivate anti-shake. Anti-shake helps focus when the camera is : Activate or deactivate anti-shake. Anti-shake helps focus when the camera is
moving.
• S ave as: Set the device to delete the original photo when taking photos with rich tone
: Set the device to delete the original photo when taking photos with rich tone : Set the device to delete the original photo when taking photos with rich tone
mode.
• G PS tag: Attach a GPS location tag to the photo. Activate this feature when taking photos
: Attach a GPS location tag to the photo. Activate this feature when taking photos : Attach a GPS location tag to the photo. Activate this feature when taking photos
to create albums in Story Album.
• T o improve GPS signals, avoid shooting in locations where the signal may be
obstructed, such as between buildings or in low-lying areas, or in poor weather
conditions.
• Y our location may appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.
to take a photo remotely using the device as a viewfinder.
: Select a resolution. Use higher resolution for higher quality. But it : Select a resolution. Use higher resolution for higher quality. But it
measures background light in the centre of the scene. measures background light in the centre of the scene.
averages the entire scene. averages the entire scene.
77