Operating Procedures; Match Lighting Instructions - West Marine 200SS Owner's Manual

Propane kettle barbecue

Hide thumbs

Table Of Contents

Table of Contents

USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS

• Magma On-Board LPG (Propane) Valves and

Hose Kits allow grills to be installed within a

boats existing on-board, pre-regulated low

pressure LPG (Propane) system. Use only

Magma A10-220 Low Pressure Propane Valve

Magma A10-225 LPG 10'

in conjunction with

Hose

Kit, as other hoses, valves or fittings may

result in damage or injury.

• A primary shutoff valve

225 hose kit)

must be used in conjunction

with this control valve at the point of

connection into your system. This allows for

shut off of the gas supply to the hose leading to

the grill.

WARNING: Do not overheat grill. Grills do not require pre-heating. Stainless Steel loses anti-corrosive

characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed.

If medium or high heat is required, grill with lid open.

• Open lid during lighting.

• Depress knob and rotate counter-clockwise to the "HIGH" flame

• Push Piezo Igniter.

• Visually confirm ignition.

• Turn knob to adjust flame.

• If grill does not light, insure that a burner electrode spark cap is directly above electrode.

• If the piezo ignition continues to fail to ignite the gas, see MATCH LIGHTING INSTRUCTIONS.

(Back up system allows use of grill until piezo ignition system is repaired.)

• Open lid during lighting.

• Depress knob and rotate counter-clockwise to the "HIGH"

flame

position.

• Hold match or gas flame lighter up to the match light hole.

• Visually confirm ignition.

• Trim excess fats from meat.

• Use non-oil based marinades.

(supplied with A10-