Download Print this page

UT INNER RANGE User Manual

Advertisement

Quick Links

INNER RANGE security system user manual for UT employees
1. Day and evening/night mode in the buildings
The buildings of the University of Tartu have specific opening hours when common areas are
not guarded and main entrances are open. UT employees should be aware of these hours.
After opening hours the doors provided with card readers can only be entered with access
cards having certain credentials.
2. Entering rooms and turning areas off
Before entering the building and workrooms, when the building has been closed, the
employees must verify if the areas are armed or not and if needed personally turn the armed
areas off. After opening the entrance door the employees have limited time to turn the
area(s) off before alarm message is sent to the security service.
3. Using the keypad
Use the keypad referred to on the picture in order
to turn the areas on or off.
The users must enter their PIN code in order to be
verified by the system.
identification number. Do not give out your PIN !
3.1 Entering the PIN code
Enter your PIN code using the digit keys and
press OK when complete.
Your name should now be displayed on the
terminal. If your name is not displayed on
the terminal or you think you might have
made a mistake, you can start again from
the beginning. Press END and re-enter your
PIN and press OK when complete.
This is your personal

Advertisement

loading

Summary of Contents for UT INNER RANGE

  • Page 1 The buildings of the University of Tartu have specific opening hours when common areas are not guarded and main entrances are open. UT employees should be aware of these hours. After opening hours the doors provided with card readers can only be entered with access cards having certain credentials.
  • Page 2 3.2 Alarm messages Alarm messages may be displayed on the terminal indicating which area the alarm has occurred in. Before proceeding, the alarm messages have acknowledged. Press the OK key after each alarm message to acknowledge the messages. Alarm messages are very rare. 3.3 Turning areas off After entering the PIN code and displaying possible alarm messages the...
  • Page 3 3.4 Turning areas on Use your PIN code to log in the system to turn the areas on. If areas are not armed the terminal displays: „is Off. Push On“. Areas can be turned on by single area or all areas together. If you wish to turn the areas on selectively use the down arrow key to scroll between the areas and push ON when desired room number or...