Turtle Beach EAR FORCE RECON 320 User Manual page 10

Windows PC Setup
5. In the Audio Channels list, make sure 7.1 Surround is
selected.
6. Click on Next two times to ensure that Front Left and
Right and Surround Speakers are set to full range. Then
click on Next again to confirm setting.
7. Click on the Recording tab, then right click Recon
320 with Dolby headphone and select Set as Default
Device. When you speak, you should see the green
sound level meter bars on the right respond.
8. Click on OK to accept the settings and close the
Sound dialog box.
NOTE: When you use a new game or entertainment
program, be sure to select Surround Sound in the
software's audio setting if available. If "Virtual
Surround Sound" or "Surround Sound Processing"
are options in-game, do not select it.
Go to Table of Contents
10