Using The Auto Station Programme Memory (Aspm); Notes For Rds Operation; To Recall Stations In Memory - Sharp XL-E100H Operation Manual

Using the Auto Station Programme
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1
Press the TUNER (BAND) button on the remote
control or FUNCTION button repeatedly on the main
unit to select TUNER function.
2
Press and hold down the RDS ASPM button on the
remote control.
1 After "ASPM" has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
2 When an RDS station is found, "RDS" will appear
for a short time and the station will be stored in
memory.
3 After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
"END" will appear for 4 seconds.
To stop the ASPM operation before it is complete:
Downloaded From Disc-Player.com Sharp Manuals
Press the RDS ASPM button whilst it is scanning for

Notes for RDS operation

If any of the following events occur, it does not mean
that the unit is faulty:
"PS", "No PS" and a station name appear alternately,
and the unit does not operate properly.
If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
"No PS", "No PTY" or "No RT" will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
The first 14 characters of the radio text will appear for
4 seconds and then they will scroll across the display.
If you tune in to an RDS station which is not
broadcasting any radio text, "No RT" will be displayed
when you switch to the radio text position.
Whilst radio text data is received or when the text
contents change, "RT" will be displayed.

To recall stations in memory

To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme
type (news, sports, traffic programme, etc. ... see page 15)
from the stations in memory.
1
Press the TUNER (BAND) button on the remote control
or FUNCTION button repeatedly on the main unit to
select TUNER function.
2
Press the RDS PTY button on the remote control.