Version Check - Samsung ST200F Service Manual

6-2 Version check

This describes how to check the version of the current firmware of the camera.
■
1. Use fully charged batteries for power.
2. First turn off the power of the camera.
3. Press the SHUTTER button + DOWN button, and then turn the
q
4. Check the version of the firmware and then turn the power off.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
Power ON
w
Fig. 6-4
Fig. 6-5
POWER on.
w
SHUTTER
SHUTTER button + DOWN button
q
Firmware update
DOWN
6-3