Advertisement
1.0 Introduction
®
The W
LOG
H-223 is a rugged, high-gain Yagi antenna designed for use with fixed location GOES
ATER
Satellite Data Collection Platforms. The antenna has two 5-element Yagi antennae mounted on an
extruded aluminum boom. The one-piece reflector and director elements lock firmly into place with a
unique ½-turn cam-lock mechanism.
Key features include:
! Rugged, heavy duty construction
! High gain
! Circular polarization
! Fully adjustable mount fits on a 2-inch pipe mast
! Can be disassembled for easy transport and shipping
2.0 Assembly
®
The W
LOG
H-223 antenna is shipped disassembled in a 4" x 4" x 48" box. You will need a 6-inch
ATER
adjustable wrench and a pair of pliers to assemble the antenna. Unpack and familiarize yourself with the
parts. You should have:
Quan
Description
1
Adjustable mount, complete with 2 setscrews, 2- bolts, 2-nuts and 4-washers
1
1" square x 38" boom
4
Dipole elements (7" long, with threaded stud)
1
Reflector-A element (14-3/4" long, with eccentric cam)
1
Reflector-B element (14-3/4" long, with round notch)
3
Director-A elements (13-1/4" long, with eccentric cam)
3
Director-B elements (13-1/4" long, with round notch)
Refer to the assembly drawing for the proper location of each element. Install the elements as follows:
! Install three sets of director elements (13-1/4" long)
! Install one set of reflector elements (14-3/4" long)
! Install four dipole elements (7" long with threaded stud)
H-223
Installation Instructions
Assembly & Installation Instructions 1-1
Assembly &
Advertisement
