Advertisement
General Cleaning
Cleaning Various Parts of Your Appliance
Before cleaning
any part of the warmer
drawer,
be sure all controls
are turned OFF and the warmer
drawer
is
COOL. REMOVE SPILLOVERS AND HEAVY SOILING
AS SOON
AS POSSIBLE. REGULAR CLEANINGS
NOW
WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR
CLEANING
LATER.
Surface
Gloss
Drawer Front Panel
Plosfic
Control
Knobs
Stalnless Steel
Porceloln Enamel
Body Parts and Drawer
Cavity
Wormer Drower
Rock
iii
How to Clean
You may use a glass cleaner
on the outside glass of the drawer. DO NOT
immerse the drawer
in water. DO NOT sproy or allow
water or the glass
cleaner
to enter behind the drawer
glass panel. DO NOT use oven cleaners,
cleaning
powders or any harsh abrasive
cleaning
materials
on the outside of the
drawer.
To remove control knob, turn to the OFF position;
grasp firmly
and pull straight
off: the shaft. Clean with a cloth soaked in soapy water. Rinse with a clean
water and a dishcloth.
To replace
knob after cleaning,
line up the fiat sides of
both the knob and the shaft; then push the knob into place.
Note: Humidity
controller
knob cannot
be removed.
Clean stainless steel with hot, soapy water and a dishcloth.
Rinse with clean
water and a cloth. Do not use cleaners with high concentrations
of chlorides
or
chlorlnes.
Do not use harsh scrubbing
cleaners.
Only use kitchen cleaners that
are especially made for cleaning
stainless steel. Always
be sure to rinse the
cleaners from the surface as bluish stains may occur during
heating
that cannot
be removed.
Gentle scouring with a soapy scouring pad will remove most spots. Rinse with a
1:1 solution of clear water and ammonia,
if necessary, cover difflcult
spots with
an ammonia=soaked
paper towel for 30 to 40 minutes. Rinse with clean water
and a damp cloth, and then scrub with a soap=filled scouring pad. Rinse and
wipe dry with a clean cloth. Remove all cleaners
or the porcelain
may become
damaged
during future heating.
DO NOT use spray oven cleaners.
The rack may be removed for cleaning.
If removed,
clean by using a mild,
abrasive cleaner
following
manufacturer's
instructions. Rinse with clean water
and dry.
7
Advertisement
