Table of Contents
Advertisement
4.1.8.
Out of Range Warning
When the handset goes out of range of the base, the screen will display
"OUT OF RANGE", and the call will be disconnected if you are on a
call. When you move back within range, the handset will automatically
reconnect to the base.
4.2
Answer a Call
If the handset is not on the charging cradle:
When the phone rings, press
If the handset is on the base or charger and if AUTO ANSWER is set to
ON:
When the phone rings, pick up the handset to answer a call.
If you wish to switch AUTO ANSWER Off, see Set the Auto Answer. The
default setting is ON.
4.3
Adjust Earpiece and Speakerphone Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of
earpiece and speakerphone volume.
During a call:
.
Press
to select from VOLUME 1 to VOLUME 5. The current setting is
shown. When you end the call, the setting will remain at the last selected level.
4.4
Mute a Call
You can mute the microphone so that you can talk to someone nearby
without letting the caller hear you during a call.
During a call:
m
1. Press
LCD. Your caller cannot hear you.
m
2. Press
T
to mute the microphone and "MUTED" will display on the
again to unmute the microphone.
H
/
to answer a call.
22
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Loop Plus and is the answer not in the manual?
Questions and answers
Can you adjust the number of rings before answering
To adjust the number of rings before answering on the iDect Loop Plus:
1. Press and navigate to select ANS. MACHINE.
2. Press and navigate to select TAM SETTINGS.
3. Press and navigate to select ANSWER DELAY.
4. Press and select the desired number of rings (2, 4, 6, or 8 rings).
5. Press to confirm.
This answer is automatically generated
Hi how do I block unwanted phone numbers
The iDect Loop Plus has a call blocking function, but the provided context does not include specific steps on how to block unwanted phone numbers. Refer to the device manual for detailed instructions.
This answer is automatically generated
How do I increase volume on Idect Loop phone?