Table of Contents
Advertisement
More blocks indicate a stronger reception signal.
Less blocks indicate a weaker reception signal.
Indicates a call is in progress.
Flashes when there is an incoming call.
Indicate that the ringer is switched off.
Steady when an alarm is set. Flash when the alarm time set
before reaches.
Indicate that the keypad is locked.
Indicate when the battery is fully charged.
Whole icon flashes when the battery performs initial charging.
Internal block icon flashes when the battery is in final charging
stage.
Indicate when the battery needs charging.
Flash when low battery power level is detected.
Indicate new TAM message / new call in TAM message list / call
list.
Indicates the speakerphone is turned on.
Indicate when there are received new Visual Message Waiting
(VMWI) not yet read. Will disappear when all the visual
messages have been read.
Indicates when the handset booster is activated.
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Loop Plus and is the answer not in the manual?
Questions and answers
Can you adjust the number of rings before answering
To adjust the number of rings before answering on the iDect Loop Plus:
1. Press and navigate to select ANS. MACHINE.
2. Press and navigate to select TAM SETTINGS.
3. Press and navigate to select ANSWER DELAY.
4. Press and select the desired number of rings (2, 4, 6, or 8 rings).
5. Press to confirm.
This answer is automatically generated
Hi how do I block unwanted phone numbers
The iDect Loop Plus has a call blocking function, but the provided context does not include specific steps on how to block unwanted phone numbers. Refer to the device manual for detailed instructions.
This answer is automatically generated
How do I increase volume on Idect Loop phone?