Kenmore ELITE 790.99613 Use And Care Manual page 18

Setting Oven Controls
Consumer Defined Control Features
Setting Temperature Display -- Fahrenheit or Celsius
The BROIL _ and FLEX CLEAN _ pads control the Fahrenheit or Celsius temperature display modes, The
v
oven control can be programmed to display temperatures in Fahrenheit or Celsius, The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550 °'' will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
2. Press _ to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
3. Press _ to accept the change or press @ to reject the
change.
PRESS DISPLAY
Q
for 7seconds Figure 1
18
Figure 2
Figure 3