Figure 14. FP1500 keypad
4.1.1
General parameters
The alphanumeric LCD screen of the FP1500 has 4 lines of information of 40 characters
each.
[Screen title]: this reminds you at all times of the current screen.
[#Exit]: the <#> key takes you back to the previous menu
Index of menu actions: Numbered in accordance with the number of options. Key in the
number allocated to each action.
Screen title
Adjust general parameters
1
[MAIN MENU]
1. Configure
2. Test.
3. Time
4
[CONFIGURE]
1. System
2. See Config.
3. Time/Date
1
[SYSTEM OPTIONS]
1. General
2. Messages
3. Modem
Language
Calibration time
LED Flashing
Historic Mode
FP1500 Installation, Configuration and Commissioning Manual
[MAIN MENU]
1. Configure
4. Connect
2. Test.
5. Disconnect
3. Time
6. Print
***
***
ALL CONNECTED DEVICES
ARE AT NORMAL STATE
00/00/0000
00:00
[# Exit]
4. Connect
7. See
5. Disconnect
8. Day Mode
6. Print
9. Codes
[# Exit]
4. System Op.
7. Events
5. Check. Prog.
8. Day Mode
6. Power supply
9. Codes
[#Exit]
: [SPANISH]
: [00:00]
: [YES]
: [NORMAL]
Return to menu
[# Exit]
7. See
Options
Any key
From the start screen, access option 1
<Configure>
If you are asked the code again, enter 9898.
Select option 4 <System Options>
Here, you can programme the parameters
1. General
2. Messages
3. Modem
by following the indications.
1-[General]: This screen lets you programme:
Language: Press the < 9 > key to select the
language.
E.g. [SPANISH] < > [ITALIAN] < > [PORTUGUESE]
< >[ENGLISH]
Calibration Time: At the hour indicated, the
calibration of the sensors is automatically
checked. An alert is given if the detector is out of
22