Whirlpool 30” (76.2 cm) Electric Built-in Ceramic Cooktop Installation Instructions Manual page 4

Now start...
With cooktop in kitchen.
Property Damage
Lift entire cooktop up from cutout
when repositioning cooktop in
countertop opening.
Failure to do so could scratch the
countertop.
I
00%
00% \
1
Insert the cooktop into the
. countertop opening. Center the
cook-top in the cutout. Check
that the front of the cook-top is parallel
to the front edge of the countertop.
Check that all required clearances are
met. If cooktop is not properly
positioned, lift the entire cook-top out of
opening to make adjustments.
screw
lamp
screw and
clamp
assembly
burn& box
2
Insert one clamp tab through
. each slot located on sides of the
burner box.
Note: If installing cook-top over a built-
under oven, Do Not fasten cook-top to
countertop with clamps. Cooktop will
then be easy to remove if servicing is ever
required.
Personal Injury Hazard
Do Not overtighten screws.
Overtightening screws could cause
personal injury or product damage.
4 Make the electrical connection.
n
(See "Electrical requirements"
and "Electrical connection"
sections, Panel B, for details.)
5
Turn on the power supply.
n
Personal Injury Hazard
Do Not touch cooktop surface. Areas
near elements may be hot.
Touching a heated cooking surface
could result in a serious burn.
6
Push in and turn each control knob
. to the 'HI" position. Check the
operation of the cooktop heating
elements and indicator lights.
Whirlpool Use & Care Guide.
Keep Installation Instructions and
Guide close to cooktop for easy
reference. The instructions will
make reinstalling your Whirlpool
cooktop in another home
as easy as the first
3
Secure cook-top to countertop
. by hand-tightening each screw;
then use a screwdriver to tighten
each screw 1 to l-l /2 more turns. Do
Not overtighen screws.
Numbers
correspond
to steps.
Panel C