Advanced Operations; Mount The Camera; Three Camera Statuses - Boly Media BG500 series User Manual

BG500 series

4.1 Mount the Camera

Camera can be mounted on a wall or put down on any
suitable horizontal surface.
1. In accordance with a base board installing hole, make
holes on the wall with a power drill.
2.Fix base board with the host by connecting screw hole.
3. Press "▲" button to open or close the laser pointer for
helping adjust the shot area.

4.2 Three Camera Statuses

From the basic operations of the camera in the previous
chapter, we know that the camera has three basic operation
statuses:
Setup Status
Setup Status: you can change or check the camera settings
in this status. You also can change camera settings via SMS
when it's in Arm status and Indoor Mode.
Arm Status: it's the work status. When there is an intruder,
the camera will take photos and send the on shot photos to
your phone or e-mail.
Disarm Status: the camera will not be triggered and can't
take photos in disarm status.

4 Advanced Operations

4 Advanced Operations
Arm Status Disarm Status
11