Rinse Aid Dispenser - Whirlpool ADP9000 Instruction Manual

1
2
3
4
5
on
Off
1
Upper Basket
2
Spray Arms
3
Low er Basket

Rinse Aid Dispenser

The rinse aid is released during the final rinse to prevent water from forming droplets o n your dishes, which can leave
spots and streaks. It also improves drying by allowing w ater to ro ll off the dishes. Your dishwasher is desig ned to
use liqu id rinse aids. The rinse aid dispenser is located inside the door next to the de terg ent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level ind icator turns completely black.
The volum e of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, with spot and streak free drying.
Attention!
Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances
(e.g. Dishwasher cleaning agent, liquid detergent). This would damage the appliance.
When to Refill the Rinse Aid Dispenser
If there is no rinse-aid warning light in the control panel, you can estimate the amount from the colour
of the optical level indicator
indicator will be dark .As the rinse-aid diminishes, the size of the dark dot decreases. You should never let
the rinse aid level fall 1 / 4 full.
Front view
4
Main F ilter
5
Deterg ent Dispenser
6
Cup Shelf
" "
located next to the cap. When the rinse-aid container is full, the whole
6
7
8
10
9
7
Cutl ery Bask et
8
Coarse Filter
9
Rinse Aid Di spen ser
3
Back View
10
Drain hose connector
11
Water Inle t hose connector
11