Table of Contents
Advertisement
Connecting the DVD Player to the Receiver
Connect the DVD player to the receiver as shown in the main diagram,
using the supplied cab&
You can piug the DVD player's power cord mto
one of the receiver's sw,tched AC outlets.
Coaxial
Digital
Cable
The coax1.3 dig&l cable (orange) caries the digital audio bitstream to
the receiver for decodlng.
Audio and Composite
Video Cables
The audio and composite wdeo cables carry the standard analog audio
and composite video s~gnais to the receiver. Use the red wire for the
right audio channel, the white wire for the left audio channel and the
yellow wire for the video connection.
S-Video Connections
If your TV or monitor has an S-Video input you can use an optional S-
Video cable to connect the DVD player to the wxeivel for improved video
quality over the standard composite video connection. if you use an S-
Video cable to connect the DVD player to the receiver you must also use
an S-V,deo cable to connect the iecewer to the TV or monitor.
Programming the Receiver Remote to Control
DVD Player
Before you can use the recwer'~
remote to control the DVD player, you
need to program the remote.
1. Press and hold the SOURCE button on the receiver's remote.
2. Using the remote's numei!c buttons, eniel the code "8-0-8".
3. Turn the DVD player's power on and press I&S 4 button to open the
disc drawer. Aim the recewer's wnote at the DVD player, press the WC
(Remote Mode) burton, then the >/Ii button. The disc drawer should
close. The receiver remote w,,, now control the DVD player. (If the DVD
player's disc drawer does not close. repeat Steps I- 2.)
ontrolling the
layer with the
eceiver Remote
To opera& the DVD player with the recewer's remote. press
Ihe DVD so"rce button, then press the button for the opera-
t,on you want to perform. If you don't press a button wthin
15 seconds, the remote automatically returns to the receiv-
er control mode, and you must press the DVD ~o"rce but-
ton agal" before operatingthe
DVD player.
"se the followng buttons on the recwer's
remote to con
troi the DVD player:
See the receiver's instwct~on manual for more information
about controillngthe
DVD player with the receiver's remote.
Activates the me
system
IT-3
Return to previous
l-r
menu *ween
Activates the
on-screen display
DVD Controls:
>)I = Search
.
= stop
<
= Flip
To connect your TV and other components to the receiver,
refer to pages 8 - 11 of the rece~ver's instructIon manual.
Advertisement
Table of Contents
