Attaching The Finder Scope; Focusing The Telescope - Vixen VSD100F3.8 Instruction Manual

2. Attaching the Finder Scope

At tach the optional finder s c ope
bracket shoe to the at tachment base
on the VSD100F3.8 with a bolt. The
bolt is supplied with the finder scope
bracket shoe.

3. Focusing the Telescope

Loosen the draw tube lock screw and
turn the focus ring on the precision
helical focuser. This allows you to
move the draw tube back and for th in
small increments.
Slide the 7x50 finder scope with the
bracket into the finder scope bracket
shoe as shown in the diagram.
Drawtube Lock Screw
Focus Ring
5
Finder Bracket
Fixing Screw
Tighten the finder scope bracket lock
s crew to secure the 7x50 finder
scope in place.
Drawtube