Freshtech SmartPRESERVE FTAC-13-10 User Manual page 9

Button featureS
pre-Heat – To activate jar pre-heating, push pre-Heat and then Start.
Start / StatuS – The status button will indicate real time process temperature
if pushed once during auto-preserving. The Status button will indicate the life
counter of your Appliance (in hours used) if pushed once prior to auto-preserving.
Stop / reSet – At any stage during the process, the Stop button can be pressed to
terminate the program. To reset the appliance, press and hold for 2 seconds.
CategorY – Displays the type of foods you can preserve in your appliance.
programmed reCIpeS – Displays the program number referenced in freshTECH
Recipe Book.
StatuS LIgHtS and pHaSe oVerVIeW
pre-HeatIng pHaSe (red) - Pre-heats your jars prior to filing with hot food
to prevent jar breakage. This phase takes 12 minutes to complete.
SenSIng pHaSe (orange) - Designed to optimize temperature for your recipe
prior to preserving.
preSerVIng pHaSe (orange) - Automatically senses and constantly monitors
time and temperature to optimize each recipe using SmartPRESERVE Technology.
™
readY (green) – Appliance is either ready for programming or the program has
completed a Pre-Heating or Preserving Phase (flashing green light).
9