Disconnect Or Unpair From A Bluetooth Device; Send And Receive Information Using Bluetooth - Sharp Aquos Crystal User Manual

1. Touch
> > Settings
2. If Bluetooth is not switched on, touch the on/off slider to turn Bluetooth on
3. Make sure that the headset is discoverable.
4. Touch the headset's name in the "PAIRED DEVICES" section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the headset or car kit
documentation to find the passcode.
6. If you still cannot reconnect to the headset or car kit, follow the instructions in Disconnect or
Unpair from a Bluetooth Device, and then follow the instructions in Connect a Bluetooth
Headset or Car Kit.

Disconnect or Unpair from a Bluetooth Device

You can manually disconnect or unpair from a Bluetooth device through the Bluetooth settings
menu.
Disconnect a Bluetooth Device
1. Touch
> > Settings
2. In the "PAIRED DEVICES" section, touch the device name to disconnect.
3. Touch OK.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To connect
to the other device again, you may need to enter or confirm a passcode again.
1. Touch
> > Settings
2. In the "PAIRED DEVICES" section, touch
3. Touch Unpair.

Send and Receive Information Using Bluetooth

You can use Bluetooth to transfer information between your phone and another Bluetooth-enabled
device such as a phone or notebook computer. The first time you transfer information between your
phone and another device, you need to enter or confirm a security passcode. After that, your phone
and the other device are paired, and you will not need to exchange passcodes to transfer
information in the future.
Tools and Calendar
> Bluetooth.
> Bluetooth.
> Bluetooth.
next to the paired device you wish to unpair.
.
107