Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Intaride IR- 803
Summary of Contents for Intaride IR- 803
- Page 1 Intaride IR- 803 User Instructions...
- Page 2 Charging: Please note that the battery supplied with this equipment has only sufficient charge to enable Intaride to test the radio functionality prior to despatch. To bring the battery to its optimum working capacity the battery has to be charged then completely discharged at least 3 - 4 times.
- Page 3 Extreme care should be taken when selecting CTCSS and DCS to ensure that transmitting and receiving radios are on exactly the same settings. (In case of Kenwood radios specific settings outlined on Intaride Website – Technical) First select your base Channel 1 – 8, and then press MENU. Use the UP and DOWN buttons to select T-CTCS and press MENU again.
- Page 4 Transmit Display Colour OFF/Purple/Orange/Blue BLUE Transmit Colour Note: If communication is required with Kenwood Radios please see Kenwood to Intaride frequency conversion chart on www.Intaride.com in the technical section. Adjust and store frequency in both R-CTCSS and T-CTCSS on IR803 Radio R-DCS and T-...
Need help?
Do you have a question about the IR- 803 and is the answer not in the manual?
Questions and answers
Hoe kan ek die letter N in die skerm deaktiveer of wegstoot?
To remove the letter "N" on the screen of the Intaride IR-803, you need to deactivate the T-CTCS (CTCSS Transmit) setting. Enter the menu, scroll to "T-CTCS," press MENU, and select "OFF" using the UP/DOWN buttons. Press MENU again to confirm. This will deactivate the transmit CTCSS and remove the "N" from the screen.
This answer is automatically generated