Table of Contents
Advertisement
6. Tap More to configure additional alarm settings such as
volume slider, Alarm tone, Location alarm, Snooze,
Smart alarm, and assign a name.
To configure additional alarm settings:
1. Tap More to access additional alarm settings.
2. Slide the slider bar left or right in the Melody volume
field to decrease or increase the alarm volume. A
sample of the volume level plays.
3. Tap the Alarm tone field and either select an available
tone or select Add to use locate a sound to use as an
alarm ringtone. Tap OK to activate the ringtone.
4. Move the Location alarm slider to the right to activate
the feature where the alarm is only activated when you
are located at a previously designated location. Use
either the on-screen map or enter a location and select
Done.
173
5. Move the Snooze slider to the right to activate the
feature. Tap the field to assgn a Interval time
(3 minutes, 5 minutes, 10 minutes, 15 minutes, or
30 minutes) and Repeat (1 time, 2 times, 3 times,
5 times, and 10 times).
• Interval indicates the length of time the alarm will remain silent
between alarm notifications (snooze time).
• Repeat indicates the numbers of snooze sessions that are
assigned to this alarm. How many times will the snooze silence
the alarm.
6. Move the Smart alarm slider to the right to activate this
feature which slowly increases screen brightness and
the volume of nature tones to simulate dawn breaking.
Tap the field to assign a interval time (3 min, 5 min,
10 min, 15 min, or 30 min) and nature tone (Fairy
fountain, Birdsong by the lake, Sparkling mist, The
secret forest, Serenity, or Gentle spring rain).
• Interval category describes the length of time the alarm will
remain silent between alarm notifications (snooze time).
• Tone category provides one of several nature sounds that are
used as the alarm tone.
Advertisement
Table of Contents
