Salton SI610 Instructions And Warranty page 8

READ THE GARMENT LABELS AND FOLLOW THE MANUFACTURER'S IRONING
INSTRUCTIONS THAT ARE OFTEN SHOWN BY SYMBOLS SIMILAR TO THE
FOLLOWING:
IRONING LABEL
NOTE: If the fabric consists of various kinds of fabrics, always select the temperature
required by the most delicate fabrics.
HOW TO FILL THE WATER TANK
1. Disconnect the appliance from main power supply outlet.
2. Ensure that the temperature dial and steam knob are in the "MIN" and "OFF"
positions.
3. Open the water inlet cover.
4. Place the iron on its heel rest and tilt forward approximately at a 45 degree angle.
5. Fill water through the water-filling inlet hole up to the MAX level mark indicated on
the side of the iron/ water tank. Never fill above this mark.
KIND OF TEXTILE
Synthetic
Synthetic
Synthetic
Silk
Wool
Cotton
Linen
FABRICS
Acrylic
Polypropylene
Polyurethane
Acetate
Triacetate
Polyamide (Nylon)
Polyester
Viscose(Rayon)
Silk
Wool
Cotton
Linen