Storing The Appliance - Salton SI610 Instructions And Warranty

 Always remember to unplug the unit from the electrical outlet when not in use and
before cleaning. Ensure that the temperature dial is set to "0"/ "OFF"/ "MIN".
 Ensure that the steam knob is set to the "0"/ "no steam"/ "OFF" position.
 Wipe the soleplate with a damp cloth and a non-abrasive (liquid) cleaner. Once
done, buff the soleplate with a clean dry cloth.
 If fiber has adhered/ stuck to the soleplate, use a damp cloth with vinegar to wipe
the fiber from the soleplate.
 If scale has blocked a steam hole, please remove it gently using a toothpick. Be
careful not to damage the surface of the soleplate
 The body of the appliance should be cleaned with a damp cloth. Do not let water
enter the appliance and cause damage to any electrical components.
 Do not use bleach or other abrasive substance or solvents to clean your appliance
as it can be damaging to the finish.
 Do not immerse the appliance in water or any other liquid, or hold it under a running
tap to clean.
Note: Never use sharp or rough objects to remove deposits from the soleplate. Never
use any abrasive or descaling agents to clean the iron.

STORING THE APPLIANCE

 Complete Cleaning and Maintenance as instructed above.
 Ensure that the steam knob is set to the "0"/ "no steam"/ "OFF" position.

Ensure that all parts are dry before storing.
 Store only once the iron has cooled completely.
 Store the appliance vertically in its box or in a clean, dry place.
 Never store the appliance while it is still wet or dirty.
 Never wrap the power cord around the appliance.