Advertisement
"1~255". After finish input, press [ACK] to confirm, one PRESET NO. is added to the
Cruising Group successfully , at this moment the LCD would back to status of indicating
input PRESET NO., preparing to add next PRESET No. . Add all PRESET NO. to Cruising
Group according to the manner of step 1& 2.
④ Save the Cruising Group set up in step ③ into High-Speed Dome Camera
In step③, after finish adding all PRESET NO., LCD will be back to status of adding next
PRESET NO., that is, the LCD indicates:
1.1Add
Position No.:1
Press [F2/OFF] button then, ,the Cruising Group set up in step ③ would save in
High-Speed Dome Camera, the LCD would then back to step ②.
⑤ By operation of step , ,
Cameras ,after finish setting up , press [EXIT] button twice continuously to exit set up
status.
8.2 Set up Keyboard Baud Rate and Protocol
This keyboard can set up different protocol and baud rate for each channel. When the
keyboard switch the dome camera/ decode address, it will output the relative control order
according to the protocol and baud rate set up.
① Baud Rate / protocol setting up
Press [FUN] button repeatedly to make the LCD indicates:
2) Keyboard
Press [ACK] to enter into setting up status of Baud Rate / Protocol.
① Input Channel No. to be set up
As entering to the setting up status, the LCD indicates:
1. Please Input
2. Camera No.888
position
② ③ ④
to
up Cruising Group of all High-Speed Dome
Setup
6
Advertisement
