Advertisement
The information indicating request users input the address of the High-Speed Dome
Camera and the number of the Cruising Group
② Set Up Address of High-Speed Dome Camera and Number of Cruising Groups
Input Manner : press number button (0~9) to input the address "1~128"of the High-Speed
Dome Camera ,after finish, press [F1/ON] button to switch the cursor to the setup status of
input Cruising Group , then press number button to input Cruising group numbers"1~4".
For example: if user set up the second group of Cruising group of No.3 Dome camera,
firstly input No."3" , and press[F1/ON] to switch the cursor to the setup status of Cruising
Group , and then input "2", at the moment the LCD indicates :
1.0 Speed
No.3
After finish setting up the address of High-Speed Dome Camera and number of Cruising
Group, press [ACK] button to confirm and enter into next set up step.
③ Add PRESET NO. into Cruising Group
1. Add PRESET NO.
Finish setting up the High-Speed Dome Camera address and Cruising Group in step ②,
press [ACK] button to enter into adding PRESET NO. status, the LCD will indicate at the
moment :
1.1Add
Position
The information indicating request users to input PRESET NO..
Press number button "0~9" and input PRESET NO."1~128", after finish, press [ACK]
button to confirm and enter next setting step
2. Set up specification of PRESET NO.
After press [ACK] button in the last step, the LCD indicates:
1.2Position: XXX
The information indicating request users to set up speed of the PRESET No. and Stop
time. "XXX" is the PRESET NO. input in last step .
Press number button "0~9" to input the stop time of PRESET NO., stop time scope:
Dome
Group No.2
position
No.:1
Time:3
5
Advertisement
