Trust 100V Instruction Manual

TRUST WIRELESS AUDIO / VIDEO TRANSMITTER 100V
1 Introduction
This instruction manual is for users of the 'TRUST WIRELESS AUDIO / VIDEO
TRANSMITTER 100V '.
The WIRELESS AUDIO / VIDEO TRANSMITTER 100V can be used for sending,
without wires, an audio, video and infrared signal to, for example, your television.
From now on, you can connect your video in the living-room to your television in the
bedroom, without wires, and in addition you can use the video remote control, the IR
signal of which is passed on through to your video.
Your wireless audio / video system can also be extended with a Trust 100 series
security camera to a wireless monitor system. For example, with the Trust 100 series
wireless cameras and your WIRELESS AUDIO / VIDEO TRANSMITTER 100V you
can protect one or more rooms.
Advantages:
•
Without wires, passes on audio, video and infrared signals.
•
Audio or video can be sent via the transmitter from VCR, DVD player, CD
player, camcorder or computer (converter card necessary) to any other point in
your living-room.
• The 2.4 GHz FM signal passes through walls, floors and ceilings.
• Works with both Pal and NTSC TV systems.
•
Can be extended with the Trust 100 series wireless equipment.
2 Safety
1. Do not use this device in damp environments, such as a bathroom, damp
basement, swimming pool, etc.
2. Do not place this device in direct sunlight. Exposure to direct sunlight or
excessive heat may damage the device.
3. Under the following circumstances, have the device repaired by qualified
personnel:
The cable or the plug is damaged or worn;
Liquid has entered the device;
The device has been dropped and/or the casing has been damaged;
4. Position the device so that the cables cannot be damaged.
5. Do not try to repair this device yourself.
6. This device has been approved according to the European R&TTE guidelines.
The device works using a 2.4GHz transmitter/receiver. If in doubt, check
whether the use of this device is permitted in your country.
UK
1