Advertisement
HOW TO POLISH FLOORS
Polish floors to give a hard, long-lasting
shiny
finish.
Attach
brushes to polisher
and guide
polisher
in straight
lines or with the grain of
the wood.
If more than one coat of wax is used, let dry
and polish a.fter each application.
HOW TO KEEP FLOORS BRIGHT AND SHINY
Floors should be polished frequently
with the polisher
to
restore
sheen and remove scratches
and marks.
This
lengthens the time between waxings.
Before polishing,
use
a vacuum
cleaner to remove dust and dirt
and a damp
sponge or mop to remove sticky food particles.
Stubborn
spots, such as black heel marks, can be removed by rubbing
gently with fine steel wool dampe'ned with wax. For added
luster, snap on buffing
pads* and buff floor.
If traffic
areas need to be rewaxed
and polished,
and
Hoover wax or solvent-base wax has been used on the floor,
apply wax only to. these areas -
then buff the entire floor.
Some brands of water emulsion wax should be removed by
scrubbing
the entire floor when traffic
areas show wear.
Additional
applications
cause a "build-up"
of wax and
may cause floor discoloration.
* See page 9.
HOW TO POLISH FURNITURE
Lambs'
wool pads, which
are available
at your
Hoover
Dealer's store, are snapped on over the polishing
brushes
to polish table tops, desks and counters.
Use paste wax
on furniture.
A very thin coat should be applied
with a
dampened cloth.
Let dry
20-30
minutes-then
polish.
CAN WE HELP YOU?
If you have questions
about home
care problems,
we would
like to hear from
you.
Please
write to :
THE HOOVER
HOME
INSTITUTE
THE HOOVER
COMPANY
NORTH CANTON,
OHIO
7
Advertisement
