Archive Setup - Baxall MDR Series User Manual

MDR Series Multiplexed Digital Recorders
Public Display Monitors
Monitor A: ON
Monitor B: OFF
Monitor C: OFF
Monitor D: OFF
Monitor E: OFF
[CANCEL] [OK]
Port Select
Background Archive
Erase Archive Medium
QuickWave Setup
Port Select
Use this menu item to select the port or interface to which the archive device will be connected. Use the Shuttle to select
SCSI if a SCSI device has been connected via the SCSI port or select 1394 if a 1394 Firewire archive device has been
connected via the IEEE 1394 Firewire port.
To save and exit the dialog, use the Jog to select [OK], then press the Enter button. To exit the dialog without saving, use
the Jog to select [CANCEL], then press the Enter button.
OFF
ON
Port Select
Background Archive
Erase Archive Medium
QuickWave Setup
QuickWave Setup
This menu item provides the option of having the QuickWave software written to any CDs that are created. This allows the
CD to be read on any PC without installing software. To enable this feature, use the Shuttle to select ON
To save and exit the dialog, use the Jog to select [OK], then press the Enter button. To exit the dialog without saving, use
the Jog to select [CANCEL], then press the Enter button.
Page 44
Public Display Monitors
Use this menu item to specify any individual monitors that are viewable by the public. Rotate the
Jog to navigate between monitors, using the Shuttle to specify whether each monitor is a public
display monitor.
A public display monitor can show images from any selected camera. However, if a telemetry
command is sent to a camera that is currently being displayed on a public display monitor (i.e.,
if the camera is needed to view a suspected shoplifter), then the monitor will cease to show
images from this camera. Likewise, if a telemetry command is sent to a camera that is part of a
sequence running on a public display monitor, this camera will be excluded from the sequence.
The camera is replaced in the sequence by the previous sequence step.
To save the changes and exit the dialog, use the Jog to select [OK], then press the Enter button.
To exit the dialog without making changes, use the Jog to select [CANCEL], then press the
Enter button.
When the Archive Setup menu item is selected from the Main menu, a sub-menu is displayed.
This sub-menu is used to set options regarding the archiving of recorded data to an external
archive device. The user can:
• Select the port where the archive device will be connected.
• Turn Background Archiving mode on and off.
• Erase the recorded data on a compatible archive device.
• Enable or disable QuickWave Setup.
Archive Port Select Setup
Archive Port Select:1394
Background Archive
Use this menu item to activate background archiving. Background archiving is where the unit
records data to both the hard disk and the archive device simultaneously. Use the Jog to select
ON or OFF.
To confirm the selection and exit the dialog, press the Enter button. To exit the dialog without
making changes, press the Menu button.
Erase Archive Medium
Use this menu item to erase all of the recorded data on an archive device. With Erase Archive
Medium highlighted, press the Enter button. If a compatible archive device is connected, a
confirmation message will appear, otherwise no action will occur.
QuickWave CD Write:
[CANCEL] [OK]
QuickWave Setup
ON
[CANCEL] [OK]
User Manual
CAMERA SETUP

ARCHIVE SETUP

.