Troubleshooting; Warranty And Liability - Fixpoint 50284 User Manual

11 Troubleshooting:

Problem
The tool does not
open.
bad crimping
other questions

12 Warranty and Liability:

• The producer grants a 2 years guarantee to a new
device.
• As the manufacturer has no influence on installation,
warranty of the product only applies to the product itself.
• If any fault or damage is detected on your device, please
contact your dealer and provide your sales slip or invoice
as evidence of the purchase, if necessary. Your dealer
will repair the fault either on site, or send the device to
the manufacturer. You make the work of our technicians
considerably easier, when you describe possible faults in
detail – only then you can be assured that faults
occurring only rarely will be found and repaired with
certainty!
• The manufacturer is not liable for damages to persons or
property caused by improper installation or operation not
described in this guide. This includes, among others, any
alteration and modification of the product and its
accessories.
• Any use other than described in this user's guide is not
permitted, and causes loss of warranty, loss of guaran-
tee, and non-liability.
• We reserve our right for misprints and changes of the
device, packing, or user's guide.
Help
Compress the tool strongly until
opening automatically.
Open a trapped tool by using the
emergency release by turning the
small wheel or by pressing.
Unlock the tool like described in
chapter "Construction".
Mind orthogonal and complete put-
ting in the cable.
Strip the cable and compress the
tool.
Remove residues from the tool.
Consult your dealer.
15