Skybeam Digital Phone Installation & User Manual page 13

Or...
Step 12
Interface Type 2: Pull the
latch(es) forward to open the
cover release mechanism.
This disconnects the jack
from your outside phone
line(s). Close and secure
the cover door making
sure the latch(es) remain
disconnected.
Step 13
Now you can plug into your
home phone network. Take
a standard phone wire and
plug one end into the "Phone
1" jack; plug the other end
into a previously active home
phone wall jack.
To use a phone in the same wall
jack, use a duplex adapter that splits
one jack into two, as shown.
13