Checking The Alerts - Parrot Flower Power User Manual

If you do not have an internet connection next to your Parrot Flower Power, synchronization
can be done in 2 steps : first sending the plant data from the Parrot Flower Power to your
smartphone (when you are next to it), then sending the data from your smartphone to our
servers (when you have an internet connection).
Synchronization duration depends on the unsynchronized data (and thus on the time elapsed
since last synchronization).
Automatic synchronization occurs every 2 hours. You can also perform a manual
synchronization. To do so:
1. Tap My garden
2. Select a plant.
3. Slide your finger downwards.
Note : Manual synchronization can be performed every 15 minutes.
Note : Make sure data are synchronized before changing the FP battery. Removing the FP
battery deletes all unsynchronized data.

Checking the alerts

Once synchronization is complete, an alert is sent to your smartphone if your plant needs
water, fertilizer, shade or sun.
The digit located next to the
to be performed on this day.
Tap To do to display the list of alerts. The icon colour
corresponds to the criticality level of the alert.
Tap an alert to read more about it or/and to change its status.
If the action is already completed, tap Done. To postpone the
action, tap Later.
Note : If the Parrot Flower Power detects that the action is
completed, the alert will be automatically removed after a few
hours (for fertilizer and moisture alerts) or a few days (for light
and temperature alerts).
.
To do icon corresponds to the number of necessary actions
Using the application 9