Table of Contents
Advertisement
Quick Links
O w n e r ' s M a n u a l
SunRay-S Pro Lighting System
www.uwimaging.com
Welcome
Congratulations on your purchase of the SunRay-S Pro lighting system.
Please inspect the packaging of your product to verify that there was no
damage during shipping.
Periodically refer to the website for instruction revisions.
Caution - Caution - Caution
We hope you have a wonderful underwater experience with Light & Motion
equipment. To increase your enjoyment and the life span of your new gear
please take an extra minute to review common errors which will result in
equipment damage or destruction.
•
Never transport or ship the housing with the camcorder inside.
This may damage your camcorder.
•
Never leave your equipment in the rinse bucket, it may be damaged by other
equipment.
•
If a product is flooded, immediately rinse it with fresh water. Most non-
electrical parts will be salvageable if not corroded by salt water.
Look for these symbols to help identify special information.
Hot Tip
@
~
Important
Caution
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Light & Motion SunRay-S Pro Lighting System
Summary of Contents for Light & Motion SunRay-S Pro Lighting System
- Page 1 Welcome O w n e r ’ s M a n u a l Congratulations on your purchase of the SunRay-S Pro lighting system. Please inspect the packaging of your product to verify that there was no damage during shipping.
-
Page 2: Table Of Contents
Getting Started Table of Contents Pictured below are the components of the SunRay Pro-S lighting system. Getting Started ............4 Take a moment to familiarize yourself with each part for later identification and use. -
Page 3: Charging Batteries
Charging Batteries Removing Batteries Due to shipping, batteries charge states will vary. It is Rotate latch at the front of the pod counter-clockwise 1/8 turn or until it recommended that you charge your Mini TC batteries stops. when they are received. Pull the front cap off the pod. -
Page 4: Assembly With Universal Mounts
Mounting Light Head QuickConnect Remove the attached arm mount using a 1/8 allen wrench. Align QuickConnect details with slots on light head. Tighten Socket Cap Screw to secure mount to light head. Mounting QuickConnect Base Light Head Remove arm base using 5/32 allen wrench. Base Attach QuickConnect and tighten Socket Cap Screw. -
Page 5: Post Dive Cleaning
Operation with BlueFin housing O-ring care & maintenance Pro lights can be operated either by the Pod Power Button or from the Smart O-rings are the critical component that keeps water out of the equipment Grip controls. and the electrical components dry. Routinely inspect o-rings and replace at least once per year. -
Page 6: Contact Light & Motion
Returning Products for Care We highly recommend a factory annual service to maintain proper operation of your SunRay lights. Before returning your Light & Motion product for care, please call or email our service department for a RMAnumber. Ship your product pre-paid freight with the return number printed on the outside of the box.
Need help?
Do you have a question about the SunRay-S Pro Lighting System and is the answer not in the manual?
Questions and answers