Troubleshooting - LG GX300 User Manual

Troubleshooting

This chapter lists some problems you might encounter while
using your phone. Some problems require you to call your service
provider, but most are easy for you to correct yourself.
Message
USIM error
No network
connection
Codes do not
match
Function cannot
be set
Calls not available
Phone cannot be
switched on
Possible causes
There is no USIM card
in the phone or it is
nserted incorrectly.
Signal weak
Outside GSM network
area
To change a security
code, you will need to
confirm the new code
by entering it again. The
two codes you have
entered do not match.
Not supported by
Service Provider, or
registration required
Dialling error
New USIM card inserted
Charge limit reached
On/Off key not pressed
long enough
Battery empty
Battery contacts dirty
Possible Solutions
Make sure the USIM card is correctly
inserted.
Move towards a window or into an
open area. Check the service provider
coverage map.
Contact your Service Provider.
Contact your Service Provider.
New network not authorised. Check for
new restrictions. Contact Service Provider
or reset limit with PIN 2.
Press the On/Off key for at least two
seconds.
Keep charger attached for a longer time.
Clean the contacts.
35