Stopping The Engine; Preventative Maintenance - Bolens nolens 1250 Operator And Maintenance Manual

The constant speed hold pedal may be used when riding
tractor for long distances at constant speed. Advance the
speed control pedal to desired speed, then lock speed lock
pedal as shown in Figure 6.
To stop the vehicle, FIRST disengage the speed lock with
heel of left foot, then gradually apply pressure to speed
control pedal in the direction desired with right foot until
tractor comes to a full stop.
Figure 11
CAUTION
Do not attempt to place transmission lever in PARK position
until tractor has come to a full stop.
When towing the tractor, place the transmission lever in
NEUTRAL position. DO NOT EXCEED SPEEDS OF 8 MPH
WHILE TOWING. Use foot brake pedal to stop vehicle when
towing.

STOPPING THE ENGINE

1. If the engine has been operating under a heavy load and is
hot, do not stop it suddenly. Allow the engine to idle for
approximately three to five minutes. This will reduce the
engine temperature more quickly and evenly than stopping
the engine.
2. Turn ignition switch off.

PREVENTATIVE MAINTENANCE

Operational maintenance and preventative maintenance are
synonymous. When neglected, unnecessary down time and
costly repairs can result. A little time spent each day by the
operator on preventative maintenance will lead to longer
operating life of the HUSKY. The removal of debris, dirt and
grease accumulations are considered normal maintenance
practices and can help discover minor difficulties before they
become troublesome.
ENGINE - Remove all dirt from around base of spark plug
and crankcase oil dipstick before removing. A gap of .030
inch should be maintained between spark plug electrodes.
See Engine Manufacturer's Manual for further maintenance of
engine.
HYDROSTATIC TRANSMISSION - Remove all dirt from
around transmission filler plug area and filter before
removing. Turn filter counterclockwise to remove. Clean
transmission cooling fins periodically with an air hose. If
tractor is being operated in a dusty environment, clean
cooling fins frequently. Consult your Bolens dealer for
transmission maintenance. (See Figures 13 and 14.)
PAGE 7
Figure 12
Figure 13