Record Schedule - Sony CCD-680E User Manual

Motion Detection:
CamGuard Security System allows the
monitoring area and sensitivity to be set
according to local conditions:
Motion Detection Area Setting: Motion
detection area can be set and activated only
in case of abnormity detected in monitored
area.
Edit: To edit the monitoring area:
Detection Sensitivity: This is the value
of motion detect sensitivity for
triggering the alarm.
Sensitivity Indication: The green area
indicates the current value detected,
while the red line indicates the
detection value set by you. When the
green area exceeds the red line, it
indicates that the alarm is activated.
The program will sound a beep as a
Click the "Edit" button to edit the monitoring area. The program provides three editing modes:
to make rectangular selection with the mouse, inverse the selected area, and fill up a color
block. When using rectangular selection or color block, you can click the right button of the
mouse to delete the selected area. Clear: Clear the monitoring area.

Record Schedule:

To record video on the locale in the specified
time period.
If you want to use this function, you should
first check the option
"Enable Record in the list period" to select it
New: To add a new time period;
Modify: To modify the time period currently
selected;
Delete: To delete the time period currently
selected;
Clear: To delete all the time periods.
14.
Alarm Set:
Click on the "Alarm Set" button to setup the alarm duration.
Alarm Duration (s): The duration between the time when some-
thing abnormal is detected to the time when the alarm is closed.
Alarm Actions:
1. Sound: When any abnormity is detected, the program will play a stream of sound to
scare the invader away. You can either select the sound effects provided by the
program or select sound files of your own. The program provides some sound effects
for direct selection. Select "Sound" first and then select one from the list. Click "OK" to
save the setting. You can also select other files on your own disk. Select "Sound files"
first and then click the file folder button on the right. Select a sound file (*.wav) on the
disk and click "OK" to save the setting.
11.