ONE-YEAR LIMITED WARRANTY Duo-Fast’s sole liability hereunder will be to replace any part or accessory which proves to be defective within the specific time period. Any replacement A one-year warranty will apply to all parts, except those listed...
An Overview of the Cordless Roofing Nailer Specifications Description Dimensions: Weight- 7.44 lbs. with battery The Duo-Fast Cordless Roofing Nailer is a self-contained, Height 12-3/8 inches ® fully portable nailer that uses liquid hydrocarbon fuel to Length 11.5 inches power a unique linear drive internal combustion motor.
Safety Instructions The following safety instructions have been included in this booklet to provide you with basic information necessary for WARNING safe operation of the Duo-Fast Cordless Roofing Nailer. ® DO NOT ATTEMPT TO OPERATE THIS TOOL UNTIL YOU HAVE READ AND UNDERSTAND ALL SAFETY Do not expose the tool to PRECAUTIONS AND MANUAL INSTRUCTIONS.
Page 6
EAR safety gear when until it is completely against the work surface. working with or in the NEVER operate the tool if the work contacting element vicinity of the Duo-Fast ® is not working properly. Cordless R o o f i n g Nailer.
Page 7
Battery Disposal: The Duo-Fast batteries contain cadmium and must be recycled or disposed of properly. It is illegal in some areas to ® place a nickel-cadmium battery into the trash or solid waste stream. You may contact your local recycling center for information on where to return the spent battery or call 1-800-822-8837 for information on Ni-Cd battery recycling in your area.
Battery and Charging System Battery and Charging System Charging Instructions The Duo-Fast Cordless tools come with a recharge- 1. Remove wall mount unit with the blue label from ® able battery and its own charging system. This the tool case and plug into a 120V AC outlet. Set...
Page 9
Battery and Charging System Battery Indicator Light On the right side of the handle is a small plastic lens. This is the battery indicator light. When you insert a fully-charged battery into the tool, you will see a blinking green light. If the indicator light blinks red, recharge the battery.
When cleaning the tool, use only operating tool or fuel Cordless tool oil. Using oils not formulated for Duo-Fast cartridge. ® the Duo-Fast Cordless Tool, may cause loss of power and ® may damage the internal parts of the tool's motor. Exposure to temperatures above 120°F (49°C) may cause...
Page 11
Do not remove fuel cartridge cap or install on other fuel cells! Roofer’s Choice™ Cordless Fuel Cartridge Disposal Guidelines Duo-Fast an industry leader in cordless technology provides this information to assist users with the proper disposal of discar ded ®...
Page 12
Quicklode™ Fuel Cartridge Inserting Fuel Cartridge C. Release the adaptor so it is centered on the fuel When loading a fuel cartridge, lift the tool off of the work cartridge. surface so the work contact element (WCE) is not depres- sed.
Choice coil nails designed to be used with the tool. of coil unwound. Make sure the coil is centered over ® The use of fasteners that do not meet Duo-Fast stan- the post. ® dards could cause tool damage and will void all warranty claims.
The Cordless Roofing Nailer should not be used Exposure to carbon monoxide may cause dizziness, in the rain or where excessive moisture is present. nausea or unconsciousness. The use of the Duo-Fast Cordless Technology ® under these conditions may result in damage to tool...
DANGER To adjust the depth of drive, loosen the work contact screw. Set the work contact to the desired position and tighten the Never attempt any maintenance of the Duo-Fast Cordless screw. Roofing Nailer without first removing the fuel cartridge and battery.
Page 16
Remove any tar build-up with Paslode Cordless Tool Cleaner. GRILLE GRILLE Duo-Fast Cordless Tool Accessories ® A variety of accessories are available for the Duo-Fast ® Cordless Roofing Nailer: FILTER FILTER Battery - Part No. 902336 Clear Safety Glasses - Part No. 401382 Duo-Fast Cordless Lubricating Oil - Part No.
Replace fuel cartridge. Tool will not cycle - fan runs, indicator light stamped on the bottom. is solid green. Spark plug is dirty. Clean tool cylinder head. Return tool to authorized Duo-Fast No spark is generated. dealer for ® service.
Page 18
Clean nose area or replace work-contacting Work-contacting element is bent, or is dirty. tool cycles. element. If tool will not operate after following the above service directions, return the tool to an authorized Duo-Fast ® representative for service. representative call 1-888-631-2020.
Need help?
Do you have a question about the DFCR175C and is the answer not in the manual?
Questions and answers