Id Remote Control Function - Panasonic TH-42LFE7U Operating Instructions Manual

Setup for MULTI DISPLAY
Item
Location
4

ID Remote Control Function

You can set the remote control ID when you want to use this remote control on one of several different displays.
Note:
To operate this function, please purchase ID remote controller sold separately.
Object model : EUR7636090R (Europe)
EUR7636070R (Other countries)
1
Switch to
2
Press the button on the remote control.
3
Press one of -
4
Press one of -
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the rst two numbers become the ID number
for the remote control.
ID remote control button operation
The operation is the same as normal remote control except for the
ID Cancellation
Press button on remote control. (This has the same effect as pressing the
Notes:
• Set the Remote ID "On" to operate the ID remote control.
If Remote ID is set to "On", you can use the remote control without identical ID number during option menu display.
(see page 44)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 44).
36
Select the required arrangement number. (A1-E5 : Refer to the following)
Display Number locations for each arrangement.
(Examples)
( 2 × 1) ( 2 × 3 )
Press to exit from adjust mode.
on the right side.
, for the tens digit setting.
, for the units digit setting.
Details
( 4 × 2 ) ( 4 × 4 )
button.
( 5 × 5 )
A1 A2 A3 A4
B1 B2 B3 B4
C1 C2 C3 C4
D1 D2 D3 D4
E1 E2 E3 E4
, , buttons at the same time.)
A5
B5
C5
D5
E5