Start-Up & Shutdown; Thump Start-Up; Thump Shutdown - Qak Thump Z-W88 User Manual

Start-up & Shutdown

Thump Start-up

1) Start with your Thump off. That is all LED
lights are off.
2) Press S4 key for 5 seconds
3) Red & blue lights will alternately flash for
1 second.
4) Red light flashes 1 time.
 If it connects to both a stereo and mono
flash once per second simultaneously.
 If it connects to a stereo source, the blue light will flash once per second.
 If it connects to a mono
 If it doesn't connect, it will then enter standby mode and the red light will
flash once per second.
with is located in 1 minute, your Thump will automatically turn off. To connect,
ensure your Thump is within receiving range of your phone.

Thump Shutdown

1) Start with your Thump on. That is, an LED light pattern is being displayed.
2) Press S4 key 3 seconds.
3) Red & blue lights flash quickly once accompanied by a single tone in your Thump.
5) Thump turns off.
5) Two single tones will sound in your
Thump.
6) Red light flashing stops.
7) It then enters connection mode and
automatically searches for a phone it has
been paired with.
source, the
the red light will flash once per second.
source,
When in connection mode and no phone it has been paired
Thump User Guide
red and blue lights will
5