Hoover 5010 HERITAGE Instructions For Use Manual page 8

Instructions for use
Always remove the plug from the power socket before fitting or removing accessories!
11447_HV_Heritage_5010_Manual_FA.indd 8
Assembling the
vacuum cleaner
1. Fitting or removing the hose
To fit the hose, insert into the air intake
duct at the front of the cleaner. Press
until it clicks into position.
To remove the hose, squeeze the end
of the hose and gently pull from the
air intake duct.
2. Fitting the telescopic tube,
accessories and floor head
a. To fit the telescopic tube to the
handle, gently insert the end of
the handle into the top of the
telescopic tube as shown.
26/08/11 12:19 PM