Disc/Usb Playback; Basic Playback - Sony SHAKE-6D Operating Instructions Manual

Disc/USB Playback

Basic playback

1
For DVD/CD function:
Press DVD/CD.
For USB function:
Press USB repeatedly until "USB A"
or "USB B" lights up in the display
panel.
2
For DVD/CD function:
Press Z OPEN/CLOSE on the unit to
open the disc tray and load a disc with
the label facing up on the disc tray.
When you play
back an 8 cm
disc such as a
CD single,
place it on the
inner circle of
the tray
Press Z OPEN/CLOSE on the unit
again to close the disc tray.
Do not forcibly push the disc tray to
close it as this may cause a
malfunction.
For USB function:
Connect a USB device to the
B port.
USB device
GB
18
Note
You can use a USB adaptor (not supplied) to
connect the USB device to the unit if the
USB device cannot be plugged into the
port.
3
Press N to start playback.
To
Stop playback
Pause playback
Resume playback
or return to normal
playback
Cancel the resume
point
Select a track, file,
chapter or scene
To select the playback source or
transferring destination (USB
memory select)
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select which
memory to use as a playback source or
transferring destination.
Note
A or
You cannot select a memory during playback or
transfer. Make sure to select a memory before
starting playback.
1
Hold down SHIFT, then press
OPTIONS.
2
Press
SEL", then press
3
Press
you want, then press
Press
x
X
N
x twice
. or > during
playback.
Or, press the numeric
buttons, then press
(Operation might be
prohibited by disc or
USB device)
/ to select "USB MEM
.
/ to select the memory
.
.