Table of Contents
Advertisement
3
Press
the equalizer level, then press
.
Frequency band
4
Repeat step 3 to adjust the level
of other frequency bands and
surround effect.
The user equalizer setting is stored
when "USER EQ" appears in the
display panel.
To bring up the user equalizer
setting
Hold down SHIFT, then press MUSIC
repeatedly to select "USER EQ".
Creating a party
atmosphere
(DJ EFFECT)
1
Press the following button to
select the effect type.
The selected button lights up and the
effect is activated.
• FLANGER: Create a deep flanging
effect that is similar to the roar of a
jet plane.
• ISOLATOR: Isolate a specific
frequency band by adjusting the
other frequency bands. For example,
when you want to focus on vocal and
etc.
• SOUND FLASH: Flash the sound
output. The sound cuts off
periodically.
• PHASER: Create a series of peaks
and troughs in the frequency
spectrum, like a sweeping effect.
GB
40
/
repeatedly to adjust
Equalizer level
2
Press DJ CONTROL +/– to adjust
the effect level.
To turn off the effect
Press the selected effect button again.
Notes
• The DJ EFFECT is automatically turned off
when you turn off the system or change the
function or tuner band.
• If you activate the DJ EFFECT during
transferring, the sound effect will not be
transferred onto the USB device.
• You cannot use VOLUME/DJ CONTROL on
the unit to adjust the volume when the DJ
EFFECT is activated.
Press VOL +/– on the remote control to adjust
the volume.
Singing along: Karaoke
Preparing for karaoke
1
Press DVD/CD or USB to select
"DVD/CD" or "USB".
2
Turn MIC LEVEL on the unit to
MIN to reduce the microphone
volume level.
3
Connect an optional microphone
to MIC 1 or MIC 2 jack on the unit.
Connect another optional microphone
if you want to sing in duet.
4
Start playing the music and
adjust the volume. Press
ECHO +/– to adjust the echo
effect.
5
Start singing along with the
music.
To turn off the Karaoke Mode
Disconnect all the microphones or press
KARAOKE MODE.
Hide quick links:
Advertisement
Table of Contents
