Advertisement
Quick Links
®
by Dometic
USA
SERVICE OFFICE
The Dometic Corp.
509 So. Poplar St.
Fabric Roller Tube Assembly
LaGrange, IN 46761
with Universal Hardware
CANADA
Dometic Dist.
866 Langs Dr.
Cambridge, Ontario
CANADA N3H 2N7
MODEL
OPERATING INSTRUCTIONS
8300
Form No. 3105849.016 6/94
©1994 The Dometic Corp.
LaGrange, IN 46761
1
Advertisement
Summary of Contents for A&E Systems 8300
-
Page 1: Operating Instructions
509 So. Poplar St. Fabric Roller Tube Assembly LaGrange, IN 46761 with Universal Hardware CANADA Dometic Dist. 866 Langs Dr. Cambridge, Ontario CANADA N3H 2N7 MODEL OPERATING INSTRUCTIONS 8300 Form No. 3105849.016 6/94 ©1994 The Dometic Corp. LaGrange, IN 46761... - Page 2 4. From the side of either arm assembly, pull sideways on TO OPEN the rafter and slide it to the top of the support arm. Place downward force on main support arm to remove slack 1. Loosen the rafter adjustment lock knobs (located behind from fabric and tighten black adjustment knob on the the main arm) and unhook the travel straps.
- Page 3 7. For extended stays and where ground and weather 8. CAUTION: Whenever heavy or prolonged rain or conditions permit, the patio position allows easier ac- wind is anticipated, or you will leave the awning cess and more usable space (FIG. 7B): unattended, it is best to close the awning.
- Page 4 3. To release the rafter arm, loosen black adjustment knob 5. Tighten the four ad- on the rafter arm and lift up on the slider catch, located justment knobs and under the slider. Pull sideways on the rafter and slide it secure the travel to the bottom of the main arm.