Changing The Tray Size; Loading Paper In The Tray; Tray 1 / Optional Tray - Samsung SCX-5835 series User Manual

CHANGING THE TRAY SIZE

The tray is preset to Letter or A4 size, depending on your country. To
change the size, you need to adjust the paper guides.
1. Push the back plate of the tray outwards completely so that it can extend
the length of the tray.
2. Squeeze the paper length guide and slide it to the correct position for the
paper size you are loading, which is marked at the bottom of the tray.
3. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
4. After inserting paper into the tray, squeeze the paper width guides and
slide them to the desired paper size marked at the bottom of the tray.
• Do not push the paper width guide too far causing the media to
warp.
• If you do not adjust the paper width guide, it may cause paper
jams.
1 Paper length guide
1 Paper width guide
Media and tray_ 46

LOADING PAPER IN THE TRAY

Tray 1 / optional tray

Load the print media you use for the majority of your print jobs into tray 1.
Tray 1 can hold a maximum of 500 sheets of plain paper.
You can purchase an optional tray and attach it below the standard tray to
load an additional 500 sheets of plain paper. (See "Available supplies" on
page 140.)
Using photographic paper or coated paper may cause problems,
requiring repairs. Such repairs are not covered by the warranty or
service agreements.
1. Pull out tray. And adjust the tray size to the media size you are loading.
(See "Changing the tray size" on page 46.)
2. Flex or fan the edge of the paper stack to separate the pages before
loading originals.
3. Place paper with the side you want to print facing down.
Paper quantity indicator shows the amount of paper in the tray.
1 Full
2 Empty
1 Paper limit mark
2 Paper level
indicator