Advertisement
Assembly lnstruction
Alter opening the box, rernove any packing material liom the foadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clcan, level surface .Make sure the power cord will easily reach in
grounded outlet.
Step l: Left Uprights
l.Take offthe motor cover .Place the l€ft and right fenders through the tube ofthe lefr
and right uprights shown as below.
2.Attach the leff uprights to the base using Ml0135 Bolt (Qty.3) ,Spring Washerr l0
(Qty.3) and Washer Ol l(Qty.3).
Next, secure the left updghts to the base shown as below.
B€fore Assembly, Plesse remove
thG Motor Cover flrst.Thcr€ sre
live Screrv on it.
Oll Wa3h€r
Ol0 SpringWrsher
Ml0135 Hex Bolt
Advertisement
