Advertisement
Gonsole Panel Functions
HOW TO USE HR Rate MODE
The console ollgrs thre€ hean mte programs: HRI Rate\t{R2 Rate\HR3 Rate programs .
Each progEm will automatically control the speed and incJine ofthe treadmill to keep
your heait mte within targcted heart rate zonc .Follow the stops below to use a heart rate
program.
Put on the chest hean rate sensor.
YOU MUST WEAR THE CHEST PULSE SENSOR TO USE A HEART RATN
PROCRAM.
As the program progresses ,thc speed and incline ofthe trcadmill will change periodically
to keep your heart rate near predetermined settings ,shown by the graphs on the left sicle
ol the console.
HOW TO USE THE FAN
Thcre are 4 diftbrent fan speeds 10 choose fiom LOW MEDIUM ,HICH ,and STOP .'fo
set the dcsired fan specd press the FAN button.
Calibration Mode
Calibration mode is entercd by pressing SPEED+ & SPEED- AND lNClLtNE r' &
INCLINE- keys -The treadmill auto .to calibrate spccd & incline rate.
ERROR CODES
Dot matrix can to display
l, "Please check safc-key" when safe-key no work
2. "Please chcck spced pulse" when no speed pulse
3. "Please check incline pulse" when no inclinc pulse
1 7
Advertisement
